RPM Sensor location and size
DGraber460 at aol.com
DGraber460 at aol.com
Mon Feb 12 12:38:48 EST 2001
The sensor is located on the front edge of the bell housing, at the rear of
the engine, above the Speedo cable connection, on the driver side. There are
2 identical sensors. One is the TDC indicator (references a steel rod on the
flywheel), and the other is the RPM sensor (referencing the teeth on the
flywheel). On some 5k engines, they are Siamesed on one mounting block. The
RPM sensor is the front most of the 2. On other motors they are on separate
aluminum mounting blocks held in with 1 or 2 10 mm hex bolts.
They are accessible from above, but the water cooled turbo cars have a few
more gadgets in the way. It should be a simple "plug and play" operation,
maybe 20 minutes.
HTH
Dennis
Everyone feel free to correct any errors-hence posted to the list.
More information about the quattro
mailing list