FS: 15" 4x108 wheels

[Per Lindgren]

Todd Phenneger wrote:

> Hey guys,
>   As brendan coolian mentioned, you may want to check out that
> site he forwarded.  Also check out martin pajaks site.  YOu can
> link to it from the links at www.audiworld.com.   (Its called
> Martins Quattro page I think).
>   Anyhow, basically you need new front struts (5ktq,5kt,ur-q, or
> 90q) and hubs to match.  On 5ktq/5kt/ur-q you use 5ktq or 5kt
> hubs.  you also need a matching set of these hubs to fit the
> rear struts.

The easier install that is completely bolt-on for my car is S2 struts, or at least S2
hubs, as the strut is the same as on my car. With the S2 struts, the joints, steering
knouckles, everything else should be bolt-on, since the car is the same.

Rear end is dead easy. All 5-bolt 5k, 100, 200 and A6 2wd vehicles from 1977 to 1997 has
the same spindle and caliper in the rear end as my car, just needed to swap the hub and
disc.

It can be the same now. The reason I asked was that I really wanted to install Porsche
Cup wheels in A100 bolt circle (5-112) on my car, but instead I ordered new Momo GT2 17"
wheels yesterday. Thanks anyways!

PerL
92 Cabrio 2.3