Rear Sway Bar, Anyone have a CGT Suspension Techniques Rear Sway bar?

[Alexander van Gerbig]

    I've never experienced the lift up inner rear wheel trick, yet.  I
rarely corner that hard, like an autox, but if I do corner that hard the car
usually starts to slide.  I agree that a bigger rear bar will probably be
the answer, now to find one.  Suspension Techniques made a rear bar for the
CGT, 27mm.  That will also bolt up to a TYP89 FWD, but it seems like that
bar is not offered anymore, nor can I find a supplier with it.  This setup
would end up as:

2Bennett coilovers - 380lbs. / 340lbs. progressive
Koni sports - dialed above medium
V6/RS2 strut brace
Stock 22mm front sway bar
Suspension Techniques 27mm rear sway bar

Now that sounds pretty good to me.  Though the difference between the front
and rear bar is a bit much, maybe make the car a little tail happy, but
maybe not.  It's all speculation since I'm the only nut in the US doing this
to a FWD 80.  If it's any consolation I will be taking ownership of one
destroyed 200q20v avant from my mum shortly.  Then I have two projects,
though the 200 will be very costly to get back into pristine condition, but
I'm in that for the long haul too.

Cheers!

Alexander van Gerbig -- '88 80

The Audi  80 Pages-----------------
http://surf.to/the80pages.com

North Ferrisburg, VT 05473