[s-cars] fender mounted blinkers

[Lee M. Levitt]

I've thought about the same thing. Here's my concerns:

- need a weird shaped lamp
- a bit low
- will probably still have to drill to route wire

Lee

> -----Original Message-----
> From: Mark Pollan [mailto:Mark.Pollan at wcom.com]
> Sent: Monday, July 16, 2001 11:28 AM
> To: lee at wheelman.com; s-car-list at yahoogroups.com; 'Qlist'
> Subject: RE: [s-cars] fender mounted blinkers
>
>
> Lee, et.al.:
>
> Been thinking about this myself and was considering pulling off the chrome
> audi badge on the plastic elevated "door guard" and putting a light in
> there.  Location might be a tad low relative to the fender mount but I am
> not drilling through my galvanized protection.
>
> Mark Pollan
> 95.5 S6
>
> >It was a whole lot easier on my Volvo...heat up the Volvo badge, pull it
> >off, pass the wiring through the exposed hole, and pop the lamp in!
>
>
>
> To unsubscribe, email: s-car-list-unsubscribe at egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>