Powdercoating Problems and Questions

[urq]

> I would suggest to get rid of the paint inside the pan! Not a GOOD IDEA!
> Not only you are having a significant peeling issue, you are also having a
> thermal issue! Your oil will run hotter since the coating will act as
> insulator! Powder coat is very thick! (Compare to spray paint)!

... seems to me that if this were a problem on the inside of the pan it
would be exactly the same on the outside ... who cares if the heat can make
it into the metal of the pan if it can't make it from there to the ambient
air!

Steve Buchholz
San Jose, CA (USA)