5000 Instrument cluster removal

[Motor Sport Visions Photography]

In a messaged ated 10/31/2001 John Holt writes:

<< On the 1986 5000 TQ Wagon, I'm baffled. After doing the same removal
process, something seems to be retaining the cluster such as an
additional
screw, cable or whatever? >>

There are only two screws, pointing upwards and accessable from the
underside of the top of the cluster. After that some clips and foam that
turns to a nasty and adheasive sludge are all that are holding it in
place...in other words, some force may be required ;-)

At least that was the case with my 1987 5kcstq cluster. When
reinstalling, note the two lower tabs that fit slots in the dash.

HTH and good luck.

Mike Veglia
Motor Sport Visions Photography
http://www.motorsportvisions.com