adjusting hood release cable + 1.8 bar fist time
Huw Powell
audi at mediaone.net
Thu Feb 14 19:35:44 EST 2002
> All of sudden (after I removed and put back the lever inside) hood
> refused to be released. I found that right latch does not move enough.
> When the right latch come to stop right one start to move, right? Is is
> how it works? When I tried to shorten cable moving bolt&nut stop under
>
> the hood (at the end of cable) then left side latch moves to open
> position and never lock the hood. I did not get how to adjust it. I
> will appreciate if someone explain it to me.
You were trying the right thing, the cable should be taut against both
spring/release levers when at rest.
The levers are supposed to move at the same time, but usually on older
cars you get the click-kerchunk effect of one releasing, then the
other. New spring/release levers in Brendan's 4kq made it work like
new, btw. My 90Q used to work at the same time until I took the front
apart to do the timing belt &c., now it's a double-clicker like all the
others.
You could try a bit of cleaning and lubing of the spring/lever things
and hood pins to see how that works.
The hood pins are also adjustable in 3 dimensions.
It is best, if playing with these things to try to get them perfect, to
do it with the grille off to allow manual override access to the
releases.
--
Huw Powell
http://www.humanspeakers.com/audi/
http://www.humanthoughts.org/
More information about the quattro
mailing list