Higher Pressure FPR for 200q20v

[Jim Green]

--- Alexander van Gerbig <Audi_80 at email.msn.com>
wrote:
>     Who makes a higher pressure FPR for the 3B that
> is a bolt on part?  I've
> found one out there at $195, but seems a bit pricey.
>  Since the RS2 or AAN
> FPR can't bolt up to the 3B I'd like to find one to
> put in with the RS2
> engine package for the 3B specifically, or at least
> be able to direct people
> where to get a good cost-effective higher pressure
> FPR.
>
>     What do folks think about using the stock 3B
> injectors and FPR with RS2
> Turbo, RS2 Exhaust Camshaft, RS2/AAN Intake
> Camshaft, RS2 Exhaust Manifold,
> and RS2 Mass Airflow Sensor?
>
> Thanks!
>
> Alexander van Gerbig -- '90 90q20v -- '88 80t
> (R.I.P)

Hmm, any good adjustable FPR is going to run you
around $150.  You can only gain so much by adding fuel
pressure, plus if your injectors are old they will
leak if you increase the pressure too much.  You can
get a set of new 45 # Bosch injectors off e-bay for a
couple hundred $.  I've never seen an actual RS2
injector, so they may not work.  I bet they are pretty
standard though.  With all those mods, you want to be
positive you can get enough fuel to the engine.
Later,


=====
Jim Green
'89 90tq EFI
http://www.geocities.com/jeg1976/car_home.html

__________________________________________________
Do You Yahoo!?
Send FREE video emails in Yahoo! Mail!
http://promo.yahoo.com/videomail/