turbo studs

[Konstantin Bogach]

I soaked them in penetrating oil, then used box wrench when possible or open end one and a hummer.  Hammering the
wrench helps to break those studs.  This way it is less possible that you snap a stud.  I broke only one stud
when I tried to pulled the wrench.  I replaced them with full threaded studs from McMaster, class 6, if I rememer
correctly.  Don't use very hard material. If it ever break syou will be in trouble.  The original stud length is
21.5 -22 mm.  I used 25mm studs if I remember correctly.

Good luck.

Konstantin Bogach.