A8 CV boot

[Tom Nas]

Thanks, Brian! I'm actually only helping out when my friend the mechanic
(who's never done this job on an A8 before) needs an extra pair of hands...

Regards, Tom

At 14:59 27-5-02 -0700, Brian O' wrote:

>remove the caliper / rotor, take the axle bolt out, the top knuckle bolt (
>may be hard, they sieze in the knuckle ) and pop out the 2 upper control
>arms, remove the tie rod from the knuckle ( a nut and bolt and a bolt
>)  remove the 6 or 8 inner cv bolts and take the axle out, do not try this
>on the car, the outter cv is too hard to pop back on fully while still in
>the car, vise teh axle, use the axle bolt that you took out of it to
>remove, or pop the cv off the shaft, and i think you must know the rest,
>if your trying this !!!