2.1 Bar fueling requirements

[JShadzi at aol.com]

--
[ Picked text/plain from multipart/alternative ]
It will run, but at that level fuel is the least of your problems, getting
enough air into the motor is a much bigger concern.  Also, you're going to
want to re-evaluate your turbo, intercooler and exh. manifold.

You need to evaluate your engine's output based on more than pressure and
fuel capability.

Typically, most of the Audi turbo CIS systems are fine to about 12-13 psi,
after that they begin making (in a diminishing returns fasion) more pressure
and hot air with the more boost they run.

For a graphic example of this see:  <A HREF="http://www.80tq.com/Dyno.html">http://www.80tq.com/Dyno.html</A>

Javad

In a message dated 4/2/2003 11:41:48 AM Pacific Standard Time,
cord4530 at uidaho.edu writes:

> My question is the following: Can a stock UrQ CIS handle the demands put on
> >it by 2.1 bar?
> >
> >Cheers,
> >Brady Moffatt
> >Montreal, Quebec, Canada