sheared woodruff key on crank pulley

[Phil Payne]

> My question is - can I just use the new Driving Belt Sprocket w/ the
> intact Woodruff Key on the slightly damaged crank or do I have to get
> a new crank? Are there any alternatives (like building up the wall with
> J B Weld or a real weld)?

No problem.  Just use the right torque - if the bolt is at the correct tightness, the Woodruff
key carries no load.

--
  Phil Payne
  http://www.isham-research.com/quattro
  +44 7785 302 803