lube drain nut HEX tool!!! 4kq

[Louis-Alain RICHARD]

When I changed my fluids, ehh the fluids on my urQ I mean, I used one
wheel bolt (actually it was the 17mm McGard lock key for the VW wheel
locking bolts see
http://www.mcgard.com/automotive/product.asp?page=4&group=3 and click
photo of 28175 ) and a 17 mm wrench.  That's all you need.

HTH,
Louis-Alain
83 urQ


Date: Wed, 19 Mar 2003 15:27:49 -0800 (PST)
From: Aaron Ryba <aaronryba at yahoo.com>
Subject: lube drain nut HEX tool!!! 4kq
To: quattro list <quattro at audifans.com>

I recently went to drain and refill the center and
rear diff lube on my 87 4kcsq and was surprised that
the drain and full plugs are actually threaded worm
nuts (female).

It looks as if I would need fairly large HEX drive
bits to take them out, (24 mm or so!) using a drive.
The rear fill looks a bit smaller than the rear drain.

Can anyone give me some advice on where to get these
tools, no luck with craftsman.

TIA

Aaron Ryba
87 4kcsq 112k