more BOOOOST!

[Marc Swanson]

> Hmm, I just don't buy that the water and oil temps are as independent as =
you're making, expecially considering oil temps are almost double what they=
 should be, and the water temp hasn't budged a bit?  You've got oil and wat=
er all moving around in the same aluminum head, water and oil temps are qui=
te correlated, you add more cooling capacity to either oil or water, and bo=
th temps reflect the increase.  Something's not adding up here for me, I've=
 never seen this IME.

I would think that the coolant temps would eventually be affected by sky
high oil temps.. but maybe the capacity of the cooling system is just so
much higher than that of the oil system that this is not the case..

Then again.. if that was true, how come the cooling system doesn't help
to keep the oil temps lower.. since the coolant stays fairly cool (and
certainly below 150c!)

Later


--
----------------------------------
Marc Swanson, Software Engineer
Sonitrol Communications Corp.
Hartford, CT

Email: mswanson at sonitrol.net
Phone: (860) 616-7036
Pager: (860) 948-6713
 Cell: (603) 512-1267
  Fax: (860) 616-7589
----------------------------------