Click click goes the clutch?

[Jim R]

Dennis,

Well it looks like your right.  There was a good size
crack right where you said, but it looks like its been
kinda repaired before.  There is a little bead of weld
at the worst spot.  Ill get the grinder out and clean
up the rust and have my master welder throw a thick
bead on on it and see what happens.

Thanks!
-Jim




--- griz_quattro at earthlink.net wrote:
> Jim,
>
> I may be wrong, (and hope I am), but check for
> cracks around
> the area around were the MC is on the firewall. I
> remember
> post from a few years ago that had somewhat similar
> symptoms.
> A flashlight was placed on the interior side of FW
> and pedal
> down the brake while a helper looks for light
> shining through.
> If you don't have crack in the firewall post what
> you eventually
> find. HTH
>
> Dennis
>
> Jim R wrote:
> >
> > --
> > [ Picked text/plain from multipart/alternative ]
> > Hi guys,
> >
> > I have this problem with my 4kq where the clutch
> pedal will "click" twice when you push it in.  It
> will do it once close to the top of the stroke and
> then again towards the bottom.  Its something you
> can not only hear, but feel in your foot when you
> shift.
> >
> > The previous owner put a slave in it, but i dont
> think a new master was installed.  Any ideas what
> could be going on?  New clutch master time?  I want
> to say the clutch fully disengages, but shifting is
> a little notchy.  That i guess could be caused by
> something else though.
> >
> > Thanks!
> >
> > ---------------------------------
> > Do you Yahoo!?
> > Yahoo! SiteBuilder - Free, easy-to-use web site
> design software


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com