Where is the engine light or plug for test engine ???? Re: My 100Q has no power again, , , big cow..

[Kent McLean]

Tony Lum wrote:
> Fortunately, the wiring for the CEL is really there, tied to the 
> rear harness behind the instrument cluster.  I just put a bulb in the 
> socket and plugged it into the warning light panel. 

There might also be some connectors under the dash, where
the steering wheel column passes through the firewall.
Chris Miller has a short write-up on using a diode and
resister to light up the codes with that connector.
<http://members.aol.com/c1j1miller/engine.html#Motronic%20ECU%20and%20fault%20codes>

You can get the diode with a resistor at Radio Shack in the US;
I'm sure a similar electronics store in Canada will carry it.

Kent
'94 100 S Avant
'89 200 TQ, "Bad Puppy"