Big problems

[Tony Hoffman]

Probably oil through the top. I'd use something thick,
and put plenty in there. Remember, if you only put in
a little, it won't get the top of the rings/cylinders,
since they sit at an angle.

Tony Hoffman
--- jesper moreau <jesper5ktqm.audi at gmail.com> wrote:

> I believe there were fewer than 3 full rotations on
> the dry cylinders.
> all of the turning over of the engine prior to this
> occurrence were
> nicely lubed by the lucas stabilizer, and I am
> imagining that it
> finally just got scraped entirely out of the
> cylinder walls. now that
> it is dry i have only 2-3 full rotations on the
> engine (mostly by hand
> because the starter is not powerful enough to turn
> the engine as is.)
> what is the best way to lube the top of the cyl. and
> with what???
> thanks all!!!
> -- 
> Jesper Moreau
> '88 5KTQ rocket
> '86 5KTQ stock
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
> 



		
__________________________________ 
Do you Yahoo!? 
Take Yahoo! Mail with you! Get it on your mobile phone. 
http://mobile.yahoo.com/maildemo