01E or 016 to V8 ?

Denis sparkplugvw at hotmail.com
Wed Sep 15 20:28:57 EDT 2004


  Ok , i see. 
  Some on Motorgeek use them on 90Q for 350hp+, never broken. It s why i might consider that option.
  Ðenis
    ----- Original Message ----- 
    From: S Dewitt 
    To: Denis 
    Sent: Wednesday, September 15, 2004 8:00 PM
    Subject: Re: 01E or 016 to V8 ?


    01A transmssions are even less reliable.

    Scott DeWitt
    Advanced Automotion
    817-939-6761
    ----- Original Message ----- 
    From: "Denis" <sparkplugvw at hotmail.com>
    To: <quattro at audifans.com>
    Sent: Wednesday, September 15, 2004 5:49 PM
    Subject: Re: 01E or 016 to V8 ?


      Ouch... so the 016 would be better to save problem.
      I can get a 01A too , sounds goo ? its from a 90Q 1995, i would get the
    3.89 rear diff too.

      thanks

      Ðenis
        ----- Original Message ----- 
        From: sdewitt at stx.rr.com
        To: Denis
        Sent: Wednesday, September 15, 2004 7:27 AM
        Subject: Re: 01E or 016 to V8 ?


        The 016 appears to be a much stronger transmission as it rarely has
    problems.
        Th  01E's weak link is the first gear which is remedied by replaceing
    the main shaft (900.00) and the first gear (345.00).

        ----- Original Message -----
        From: Denis <sparkplugvw at hotmail.com>
        Date: Tuesday, September 14, 2004 10:12 pm
        Subject: Re: 01E or 016 to V8 ?

        >  Even It s a 5 speed tranny ? its for 240 stcok first , then
        > 400hp  turbo engine. I tought is stronger than 016 and more precis
        > tranny, faster... than the 016.
        >
        >  So the best choice is 016 or the moded 01E with the wider first
        > gear, right.
        >
        >  Ðenis
        >
        >    ----- Original Message ----- 
        >    From: S Dewitt
        >    To: Denis
        >    Sent: Tuesday, September 14, 2004 9:35 PM
        >    Subject: Re: 01E or 016 to V8 ?
        >
        >
        >    The 93 01E you are speaking of probably has the weaker
        > mainshaft in it. I
        >    would stay away.
        >
        >    Scott DeWitt
        >    Advanced Automotion
        >    817-939-6761
        >    ----- Original Message ----- 
        >    From: "Denis" <sparkplugvw at hotmail.com>
        >    To: <quattro at audifans.com>
        >    Sent: Tuesday, September 14, 2004 8:03 PM
        >    Subject: 01E or 016 to V8 ?
        >
        >
        >    I have the choice to use the 016 box 0r the 01E 1993.
        >
        >    The ratio is similar but the shifting mecanism... is
        > different.....
        >    Whitch one and why use a 016 or o1E for a V8 3.6 for a projetc.
        >    thanks
        >
        >    Ðenis
        >    _______________________________________________
        >    quattro mailing list
        >    quattro at audifans.com
        >    http://www.audifans.com/mailman/listinfo/quattro
        >
        >
        > _______________________________________________
        > quattro mailing list
        > quattro at audifans.com
        > http://www.audifans.com/mailman/listinfo/quattro
        >


    _______________________________________________
    quattro mailing list
    quattro at audifans.com
    http://www.audifans.com/mailman/listinfo/quattro




More information about the quattro mailing list