Front wheel bearing replacement

[Kent McLean]

rob hod wrote:
 > How tight a fit is the bearing in the housing? - do I have
 > a chance of doing this with judicious use of heat, some
 > appropriately sized drifts and a BFH? or is it only really
 > doable with a hydraulic press?


One method is to remove the hub, then take it to a
local machine shop and have them press out/in the
bearing.

--
Kent McLean
'94 100 S Avant, "Moody"
'89 200 TQ, "Bad Puppy" up in smoke