Still looking for Intercooling heat sensor

[KWSTURTZ]

 I found it !
Very audi dumb me the intercooler is the radiator like thingamabob 
connected with ribbed hose to what i call the turbo thingamajig ...... 
Simple  pulled off sensor wire protective cap and bingo one broken (out 
of 2) wire at the terminal  now have to figure how to fix as not 
standard connector it it much smaller anybody know where to get ?.  
other Question is can this cause my check engine light to blink on when 
under torque ?.

LL - NY wrote:

>Check http://www.sjmautotechnik.com and the diagnosis sections. The intercooler
>sensor is right near the Michelin Man (ribbed) hose on the intercooler
>itself. Held in by two 5 mm allen screws. It appears that there is
>only one wire coming from the sensor, but it's really two. There is no
>connector unfortunately, so it means cutting and splicing. Use good
>sealing heat shrink. Sources for the sensor would be places like
>lister Chris Semple at Force5  automotive, (don't have the website,
>other listers may help), or 1-800-VWPARTS or the like. Just follow the
>Bentley procedures on testing the sensor for the proper resistance.
>The test is well documented in the Bentley also.
>
>  
>
>>    
>>
>
>  
>