Stainless Steel Braided Brake Lines

[Bluemaxww1 at aol.com]

Not to butt in, but before I made up a hard line for my 996 calipers on my  
coupe, I used the rear rubber lines off a coupe for the front.  They were a  
little longer and worked just fine.  The female fitting in the caliper is a  
match for the male end on the Audi OEM line.  After I realized I didn't  have to 
move the caliper, to change the pads, I made up hard lines.  Of  course, the 
coupe uses a flex, hard line, flex line for the original G60  fronts.  So I 
only used the flex line from the inner fender to the strut  and then replaced the 
hard line/flex line from the strut to the caliper with a  hard line.
 
Greg
 
In a message dated 3/11/05 6:38:45 PM Pacific Standard Time,  
t44tqtro at gmail.com writes:

Hey  Brett-
Regardless of the fact that you and I disagree on this issue,  explain
to me where you can get OEM rubber lines for an Audi that has  Porsche
calipers on it.

Taka