Where to rent tool 2084 for timing belt...

[SAM LETZRING]

I built one a dozen years ago for my 86 4KCSQ- still have it around- don't
know if it will fit your application- but if it will- you can borrow it.

sam
----- Original Message ----- 
From: "Huppert, Eric" <Eric.Huppert at ny.ngb.army.mil>
To: <quattro at audifans.com>
Sent: Tuesday, October 04, 2005 6:37 AM
Subject: Where to rent tool 2084 for timing belt...


Dave,



Have changed many timing belts on the Type 44's without the crank tool....
Can't imagine yours is much different. Have assistant "stand on the brakes",
car in first gear, ½" breaker bar/socket with about a four foot bar to
extend the breaker bar (usually use a floor jack handle). Takes about ¾'s of
a turn to get the "slack" out of the drive train, brakes set.



E-brake is only rear axle, brake pedal is both front and rear!



This has worked every time. One of these days I'll get or make the right
tool....



Torque is torque, penetrating oil isn't going to do anything!



Eric





_______________________________________________
quattro mailing list
quattro at audifans.com
http://www.audifans.com/mailman/listinfo/quattro