Digifant 1 on 5000TQ installation

[Denis]

Hi all.
i m installing digifant 1 on a Audi turbo 5 cyl engine.
I know it fits there and i already saw couple, and heard about it. I know its not the best system for EFI but its cheap and should be much better than CIS.

I got a Digifant 1 from Audi 5000TQ87. This system was fitted in this car but its from a jetta. The car was at the junkyard.
The installation was not really good and when i removed it wires was falling appart... :banghead: 

So i need the wiring diagram and tips to install it on another Audi 5 cyl.

The audi distr was connected to the Digifant module so i should expect Digifant makes sparks to 5 sparkplugs. And as i looked at VW distr and there is 4 windows for 4 cyl. I then expect to use a 5 windows distr instead of 1......

But i did not notice the Bosch ignition module. the coil was connected to Digifant module on on side.... +. The - was unconnected,,, wire has been cut.

I already remake the wiring, made longer wiring... used better plug...

Someone can put me on the right direction ?

thanks all.


Ðenis
www.Efi4Tuning.com