re. 80q alarm problem

[Ben Swann]

Tom,

It sound like you got the trigger switch installed of center - difficult to 
get right, as you need to mesh those tiny teeth while putting it all 
together  - blind with little space - BTDT PITA.

The workaround would be to disconnect the switch connector inside the door.

Ben

[Date: Sun, 22 Jan 2006 17:36:03 -0800
From: "Tom Love" <theloves at localaccess.com>
Subject: 80q alarm problem
To: "QUATTRO LIST" <quattro at audifans.com>
Message-ID: <006601c61fbd$5f4e3a00$1102a8c0 at tom>
Content-Type: text/plain; charset="iso-8859-1"

I replaced the drivers door handle and lock today and now there is a 
problem. I went to start it and the ignition was dead and the alarm went 
off. I cycled the key in the door and it shut off. Open the door and it goes 
off again. so on and so on so I remove the #19 fuse to disable the thing but 
I lose the central locking. Is there a better way to disable the antitheft 
system? Any ideas what is causing the problem? TIA for any help.]