013 vs 016 transmissions

[David]

What about using an 092 or 093? 093 is the hydro clutch FWD from 5-cylinder FWD 1984.5+ 4000 & Coupe GTs. The 092 is the FWD 5-cylinder hydro clutch tranie from 1987 CGT 2.3 and (I think) the FWD type 89 5-cylinder cars. The 092 was built using larger inner CV-joint hubs, like those used on the later Audi's.

Dave
1987 CGT 2.3
SE VA

> 
> From: Huw Powell <audi at humanspeakers.com>
> Date: 2006/01/26 Thu PM 07:10:58 EST
> To: Roy Wendell <erwendell at mac.com>
> CC: quattro at audifans.com
> Subject: Re: 013 vs 016 transmissions
> 
> 
> 
> > I'm looking at using an audi transaxle in an electric powered formula
> > car that my university runs. The
> > only problem is that fwd 016 gearboxs don't seem very common.
> 
> According to what little information I have accumulated in a 
> spreadsheet, that might be because the 016 is specifically a quattro box?
> 
> > I do
> > however have a line on an 013 from an 84 coupe gt thanks to this
> > list. What I need to know is what are the differences between the 013
> > and 016 coded boxes? They have similar application ie fwd 5 cylinder
> > VAG products. I know that they have different gear and final drive
> > ratios but is that it?
> 
> And the 013 is 2wd.  Ratios vary under both codes, again, just going by 
> some info I have.  2wd and Q boxes have different mounts, and different 
> shift linkages.  The engine bolt-up seems to be the same on all the old 
> Audi trannies.
> 
> 013's are also cable clutch actuated, 016's are hydraulic.
> 
> -- 
> Huw Powell
> 
> http://www.humanspeakers.com/audi
> 
> http://www.humanthoughts.org/
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
>