No start until I push in the instrument cluster 90q

[Grant Lenahan]

Dave,

I dont really follow your explanation enough to comment.

but if pushing in your dash causes the ignition switch to work, I would 
think of:

1) Harness is loose on back of switch (easy to happen)
2) broken wire in harness that was the problem all along (ditto, its 
tight and easily damaged)

Grant
On Mar 17, 2006, at 3:28 PM, David Thoresen wrote:

> I recently had the ignition lock and switch replaced on my 90q20v...
> worked fine up until a few days ago, then I jiggled the wiring in the
> back to get it to work... now it doesn't start at all.  I turn the
> key and the instrument panel lights don't come on at all... I dont
> hear the fuel pump.  I partially removed the instrument cluster and
> there is a loose connector  that is coming out of the main large
> connector in the back of the cluster... does that go to anything?  Or
> should I look elsewhere for a loose wire?
>
> Thanks You!
>
> David
> 90q20v
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
> ---
> Watch this space for ads :)