'01 A4q ABS Module

[Tony Hoffman]

Very common problem. The easiest and cheapest is to pull it and have
it rebuilt, as Wilie said. If you choose to go with used or rebuilt
from Audi, you HAVE to make sure to match the part # of the one you
are pulling. Went through a headache on a customers car where they put
a used one in there, but it didn't match. We replaced it with a
rebuilt factory part matching the part # of the one on the car, that
didn't fix it either. Several days of labor and wire tracing later,
they brought the original in, and the part #'s didn't match. Put a
rebuilt in that matched that #, and the system was back to
opperational.

Tony Hoffman

On Sat, Dec 27, 2008 at 1:38 PM, Steve Meyer <quattroslm at yahoo.com> wrote:
> Apparently these are expensive to replace...and there is an annoying beep associated with it. What options are out there? Do you really need it...can it be bypassed and the beep silenced? I don't have anything that new so I'm not much help to my friend with the issue.
>
> Thanks!
> slm
>
>
>
> _______________________________________________
> quattro mailing list
> quattro at audifans.com
> http://www.audifans.com/mailman/listinfo/quattro
> ---
> Watch this space for ads :)
>