4k, 5k, 200's quantums etc. manual transmission gear linkage bushing

[Max Hoepli]

I have a 1986 type 44 with 302,000 km, the car has to be still when the
transmission is cold shifting from N to 1, otherwise there is no problem
shifting.
Would I need one of those delrin parts?
My mechanic has never mentioned that part.
Delrin is what kind of material?

Max
Toronto

-----Original Message-----
From: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com] On
Behalf Of Montague, Scot
Sent: Tuesday, August 04, 2009 13:28
To: quattro at audifans.com
Subject: 4k, 5k, 200's quantums etc. manual transmission gear linkage
bushing

Took my 86 5ktq to the shop due to sloppy gear linkage that was making it
tough to get in 1st and 2nd.  We found out that the part, a nylon bushing
was no longer available. One of my mechanics said that he used to keep a
number of them in stock due to the high failure rate, but he hasn't any more
available!
Long story short, rather than discard the car for lack of a simple part, we
decided to fabricate a replacement out of delrin, and this item should be
superior to the nylon part. If you also need one (or want a spare) I can
make some for you.

Scot Montague

Meadows Facilities Office
Staff Advisory Council/Meadows Representative
SMU Cycling Club
214.768.2713

_______________________________________________
quattro mailing list
http://www.audifans.com/mailman/listinfo/quattro
http://www.audifans.com/kb/List_information