1984 4k - no start

john at westcoastgarage.net john at westcoastgarage.net
Wed Aug 5 15:17:23 PDT 2009


Robert Rossato wrote:
> I'm assuming Brett was referring to replacing the hall sensor element
> itself.  Depends on how handy you are, but shouldn't be all too
> difficult.
>
> An example of cost:
> http://www.bbautomacao.com/products.asp?cat=14&gclid=CObMnrCnjZwCFSDxDAo
> dgCJOYw
>
> Never looked at the hall sensor in the distributor, so not sure if any
> of these are the right ones but the HME301 is used as the Cam Position
> Sensor on the AAN.  If you do go this way get the versions with hollow
> rivets for ease of installation.
>
> Bob
>
>   
>> As the problem is nearly always the wiring inside the distributor, I'm wondering whether or not the low bucks unit comes with wiring, and if that wiring is appropriate for this application in terms of diameter and resistance to flex damage.  John
>>     



More information about the quattro mailing list