10v front pulley bolt again quattro Digest, Vol 78, Issue 53

[dgraber460 at aol.com]

Others DIRECTLY on the crank do the impact

Pleeeeeeeaasee...NO impact on the crank pulley!!!
I had heard the warning and ignored it to my peril. I spent over 2 months tracking a no spark on a 3B URQ that ended up being a sheared crank pulley key from the impact installation.
Fortunately it only moved far enough to go out of the hall window. No bent valves.

Dennis 
Denver


-----Original Message-----
From: Scott <suffolkd at aol.com>
To: quattro at audifans.com
Sent: Wed, Apr 28, 2010 4:16 pm
Subject: Re: 10v front pulley bolt again quattro Digest, Vol 78, Issue 53


 
WARNING about the crank bolt:
One tool is a MULTIPLIER to obtain ~325 ft lbs.
Others DIRECTLY on the crank do the impact, jump, breaker bar w/grunt to obtain 
he ~325 lbs needed.
Info here as well as Chris Millers site, Scott Mockery - SJMautotechnik:
http://www.quattro123.com/AudiTimingBeltChange.htm
Photo of Multiplier:
ttp://www.quattro123.com/TB415CrankLockersC.jpg
INSTEAD OF, BREAKER BAR:
http://www.quattro123.com/TB442A.jpg
HTH - Scott by BOSTON? quattro123.com
_______________________________________________
uattro mailing list
ttp://www.audifans.com/mailman/listinfo/quattro
ttp://www.audifans.com/kb/List_information