April 2010 Archives by thread
Starting: Thu Apr 1 00:21:55 PDT 2010
Ending: Fri Apr 30 08:23:39 PDT 2010
Messages: 357
- '86 5KTQ; need front passenger-side hub!!
cobram at juno.com
- '86 5KTQ; need front passenger-side hub!!
cobram at juno.com
- Trying to validate if seller is legit
Ben Swann
- Trying to validate if seller is legit
cobram at juno.com
- '86 5KTQ; need front passenger-side hub!!
Ben Swann
- Trying to validate if seller is legit
Paul DAnneo
- Trying to validate if seller is legit
cobram at juno.com
- Trying to validate if seller is legit
Mike Arman
- FW: WTB '91 200Q 20V Transmission - Good News!
Ben Swann
- More Spam
Paul DAnneo
- Foggy windows
Huw Powell
- abandoned supercars
Kent McLean
- Preparing For Motor Swap '88 5kCSQA
urq
- abandoned supercars
TWFAUST at aol.com
- abandoned supercars
TWFAUST at aol.com
- A4 quattro rear end noise
Ben
- A4 quattro rear end noise
Eric Sanborn
- Abandoned Supercars
TWFAUST at aol.com
- '02TT revisited
Dave
- power steering hose question
thejimrose
- Rear end noise
Ben
- 1990 200 idles fine, but has no power and stutters over 3000rpm
David Yentema
- '02TT revisited
Stephen Kormilo
- Abandoned Supercars
TWFAUST at aol.com
- quattro generation 6: the torsen is dead...
Dave
- A4 turbo mod questions
Steve Marinello
- Whooshing sound under the hood - not making full boost 200 10vt
Brian K. Ullrich
- [s-cars] A4 turbo mod questions
Steve Marinello
- quattro generation 6: the torsen is dead...
Dave
- Whooshing sound under the hood - not making full boost 200 10vt
cobram at juno.com
- TT wheel
Tihol Tiholov
- quattro generation 6: the torsen is dead...
Tihol Tiholov
- Master Cylinder - 200Q20VTQ made of unobtanium?
Ben Swann
- Master Cylinder - 200Q20VTQ made of unobtanium?
Ben Swann
- Master Cylinder - 200Q20VTQ made of unobtanium?
TWFAUST at aol.com
- [urq] No start situation - suddenly
Ben Swann
- Starting issue
Danton J.A. Cardoso
- A reason to go to the Pikes Peak Hillclimb this year???
urq
- More horsepower
Mike Arman
- ABS warning light - A4 (B6)
Arthur Marks
- 1.8T Oil(?) Leak
Dan DiBiase
- allroad sunroof problem
Stephen Kormilo
- Fuel grade in A6 4.2
Eric Sanborn
- Wiring diag.
Paul DAnneo
- updates on my 200 avant w/ no power
David Yentema
- 1.8T Oil(?) Leak
Dan DiBiase
- Fuel grade in A6 4.2
David Giannandrea
- VAG relays
Tihol Tiholov
- VAG relays for Eurovan
Ben Swann
- VAG relays
radek at istar.ca
- Bentley Manuals
Vic
- VAG relays
Tihol Tiholov
- 90 90 no fault codes.
Mark Rutherford
- Timing marks V6
MXHOWES at aol.com
- MAF issues
Kyle D. Ledford
- V6 2.8 L timing belt
William Magliocco
- I got the 200 Avant home!
David Yentema
- MAF issues
Tihol Tiholov
- [urq] Carlisle
Ben Swann
- Squeaking Noise - Tie Rods or Control Arms
mkb
- Squeaking Noise - Tie Rods or Control Arms
Peter Golledge
- Squeaking Noise - Rear End
Max Hoepli
- Squeaking Noise - Rear End
Grant Lenahan
- Squeaking Noise - Rear End
Huw Powell
- Paint for auto, RV, trailer, etc.
Fay Kelley
- Paint for auto, RV, trailer, etc.
Kent McLean
- Paint for auto, RV, trailer, etc.
George
- Paint for auto, RV, trailer, etc.
Fay Kelley
- audi sales in europe
Dave
- Squeaking Noise - Tie Rods or Control Arms
mkb
- A4 camber adjustment? inside tire wear
Arthur Marks
- A4 camber adjustment? inside tire wear
Tihol Tiholov
- [urq] heater core
Ben Swann
- A4 camber adjustment? inside tire wear
thejimrose
- Coolant leak, '01 A6 4.2
john at westcoastgarage.net
- rear end noise solved
Ben
- A4 camber adjustment? inside tire wear
thejimrose
- Is my brake booster toast?
McCohens at aol.com
- Blower Motor 94 S4
David Giannandrea
- Rear differential lock always on
Radek
- NAC- Lee Iococca is Back
Al S
- NAC Iococca
Al S
- NAC - Lee Iacocca is Back
Ingo Rautenberg
- Pitted Pistons
Bill Green
- Pitted Pistons
Bill Green
- Rear differential lock always on
Radek
- Pitted Pistons
Bill Green
- ETKA download ??
MCB
- Replacing a Partly Worn Tire?
Stephen Kormilo
- 10v front pulley bolt again
Tihol Tiholov
- ABS Sensor A6
Kyle D. Ledford
- 10v front pulley bolt again
rob
- close out prices on T44 barke parts
David Michael
- heat resistant plastic casting - definitely NAC
Kent McLean
Last message date:
Fri Apr 30 08:23:39 PDT 2010
Archived on: Fri Apr 30 08:24:17 PDT 2010
This archive was generated by
Pipermail 0.09 (Mailman edition).