CS5000 turbo quattro blower motor

[Tony Hoffman]

I use a large prybar, and a piece of wood. THe wood is so you don't
bend the firewall where the seal sits. Put the prying end of the
prybar into the small (about 2X2") piece of plastic that is screwed
into the side of the box on the left (drivers side in the US) and pry
upward. You are right, though, it's well glued into place!!

Tony

> On 8/9/2010 10:22 PM, John Lagnese wrote:
>> If its like my 91 200 200 TQ 20V I just about used a crowbar to loosen
>> the blower housing. It is really glued to the firewall.
>>
>> -----Original Message-----
>> Subject: Re: CS5000 turbo quattro blower motor
>>
>> Sorry, I neglected to say that he DOES have a Bently manual. However, he
>>
>>    just cannot get the blower box out of the car. It seems to be glued in
>>
>> there quite strongly, and he is afraid of breaking it.
>>
>> Richard Thomsen