Valve Comer Gasket Installation

[Huw Powell]

On 3/20/2012 4:30 PM, Max Hoepli wrote:
> Taking off the old valve cover gasket and the half-circle rubber piece at
> rear I noticed no glue or gasket goop or silicone around the old rubber
> gasket. At the front of gasket I noticed a thin reddish rubbery strip coming
> off, not very much. Should I put silicone black goop on both sides of new
> gasket?

No, just install it and don't over-torque the nuts - they are supposed 
to be very low torque, I forget the number.

I hope your new gasket is the rubber one not the cork one.

> Noticed no sludge build-up around camshaft. A somewhat reddish-browny colour
> on surface of camshaft and hold-downs and upper surface of cylinder head.
> Inside surface of valve cover is clean. I changed out the rubber ring of the
> oil filler cap. The old rubber gasket of oil filler cap just broke away.
>
>
>
> Patient: 1986 type 44 turbo quattro, 318,000km
>
>
>
>
>
> Max
>
>
>
> _______________________________________________
> quattro mailing list
> http://www.audifans.com/mailman/listinfo/quattro
> http://www.audifans.com/kb/List_information
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.1913 / Virus Database: 2114/4882 - Release Date: 03/20/12
>
>