Motor mounts for driver side front 1990 80

[Tony Hoffman]

Since I rebuild window regs for UrQ's and CQ's a lot, I've replaced a ton
of them. I just use fuel filter mounts. The factory window motor ones are
actually two different sizes. However, the filter mount ones are in between
teh factory ones, and have worked fine on the dozen or more I've done.

If they are integral as Huw mentioned (I havent' seen any like that, but
It's not like I've seen every version of Audi parts through the years) then
I'd probably grind the area flush, drill and tap it. Then, install the
filter mounts.

Here they are:
http://www.autohausaz.com/search/product.aspx?sid=i0akjujl0ubrmj55m52xku45&makeid=800002@Audi&modelid=1366770@4000CSQUATTRO
&year=1986&cid=22 at Fuel %26 Air System&gid=16333 at Fuel Filter Mount

HTH,
Tony

On Sat, Nov 3, 2012 at 7:10 PM, Al <streichea001 at hawaii.rr.com> wrote:

> My driver side window has been making a clunk, clunk sound as the windows
> moves up or down. I took the door apart and found that the rubber motor
> mounts had been sheared off.They sheared off at the end that attached to
> the inner door panel.
> I did not see them in my FA. Any BTDT's. Can I superglue the pieces
> together? What is their correct nomenclature?
>
> I am glad it was not the whole window regulator.
>
> Al