Type 44 Front bumper removal?

[Kneale Brownson]

You have to start by removing the bumper:  From underneath on each side, remove the vertical bumper bolts.  They're Allen bolts.  If they've not been off in a long time, they may require a lot of force.  Take out the lights in the bumper.  Then pull out on the trailing edges of the bumper cover at the wheel wells.  The assembly should  slide forward and off.  Then you can see the fasteners holding the rest of the trims, the headlights, etc.

Sent from my iPhone

On Jul 22, 2013, at 9:33 PM, "rob" <rob3 at hod3.fsnet.co.uk> wrote:

> 
> Hi gang,
> 
> For the first time in 13 yrs ownership I need to remove my front bumper. My
> question is how to get off the little 1/2 inch black beauty strip that sits
> vertically above the bumper trims and below the headlights/indicators/grille
> etc. 
> 
>  This seems to be connected with the side bumper trims. I can pry up the
> center bumper trim so that they unclip from the bumper, but the side trims
> are less eager and I'm afraid to force them. But they do seem to be the key
> to detaching the full width strip.
> 
>  Any BTDT?
> 
> Thanks Rob.
> 
> 
> 
> _______________________________________________
> quattro mailing list
> http://www.audifans.com/mailman/listinfo/quattro
> http://www.audifans.com/kb/List_information