[s-cars] Tweaking FMIC's?

[Trevor Frank]

@ 48 degrees F : (CFM * 0.078125) = LB/MIN
@112 degrees F : (CFM * 0.070318) = LB/MIN
@175 degrees F : (CFM * 0.06251) = LB/MIN

lb/hr is roughly equal to 10xcrank hp.  So 275cfm = 21lb or 210crank hp,
or 550cfm = 42.9lb/hr x 10 = 430 crank hp.

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of FvAMI at aol.com
Sent: Thursday, August 05, 2004 4:17 PM
To: bbell at surview.com; mlped at qwest.net; s-car-list at audifans.com
Subject: Re: [s-cars] Tweaking FMIC's?

In a message dated 8/5/04 3:59:52 PM Pacific Daylight Time,
bbell at surview.com
writes:


> At 7000 rpm in a perfect world we are talking about 275 cfm

Sounds like a normally aspirated 2.2 liter number ... so at 1 bar boost
I
think it is 550 cfm.

Best regards,
Feico van der Laan
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list

=======
Notice: This e-mail message, together with any attachments, contains
information of Symyx Technologies, Inc. that may be confidential,
proprietary, copyrighted, privileged and/or protected work product,
and is meant solely for the intended recipient. If you are not the
intended recipient, and have received this message in error, please
contact the sender immediately, permanently delete the original and
any copies of this email and any attachments thereto.