[s-cars] Re: connector holding bracket on the firewall

[Konstantine Bogach]

It did not move first because of corrosion on the bracket and I decided 
that it has a locking tab which similar bracket on 200tq has.  So, I did 
not insist much.   After squirt of penetrating oil it slid right off..  

Thanks for replies.
Konstantin.

Vincent Frégeac wrote:

>I don't know if it applies to all connectors but, for example, to remove
>the ground connectors for the ignition coil, you have to disconnect the
>female connector then you can slide the male connector off its bracket.
>It cannot be slide off with the female connector attached. If it's the
>first time you remove it, as it is obviously, a little penetrating oil
>will help the male connector sliding off the bracket.
>
>HTH
>  
>