[s-cars] Turbos---Turbos FS---RS2 Turbos FS

[Trevor Frank]

Hey Joe, I talked to shiv and he said that the HKS 3X/37 was the turbo
they where using, somewhat equivalent to the GT30R.  He also said that
they made upwards of 500whp on this turbo.  The gt35r he claimed was
good to somewhere in the 500+whp range.  Does that sound right?

-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Joseph Pizzimenti
Sent: Thursday, May 13, 2004 7:12 AM
To: mswanson at sonitrol.net; CaptMagu at aol.com
Cc: s-car-list at audifans.com
Subject: Re: [s-cars] Turbos---Turbos FS---RS2 Turbos FS

Marc,
Turbo should be around 1200 or so, depending on which
backhousing you go with.

The GT32 is not available in a ball bearing center
section.
The GT35R is.

I believe you can get a T3 flange on the backhousing
if you specify...or just cut the T3 off and weld a T4
on there, whatever's cheaper.  :-)

I know that a 1.05 backhousing is available.  In
Evoland, us ricers are known to use 0.63's and 0.85's,
but that's on a 2.0L.  On 2.2 "strokers", the 1.05 is
somewhat common, so I guess it would be appropriate
for a car with a proper number of cylinders.

Joe

--- Marc Swanson <mswanson at sonitrol.net> wrote:
>
> > I went by TEC today to pick-up my new Garrett GT35
> turbo.
>
> Hap,
>
>
> I'll be interested on your impressions of this
> turbo.  I'm shopping the
> Garrett GT series as well at the moment (I'll also
> be running a tubular
> manifold).  I was checking out both the GT32 and
> GT35 as possible
> candidates for my 2.3L 20vt (NG lower end, 7A head)
> 4ktq.  As I'll be
> running stock NG connecting rods and pistons I don't
> want to shoot for
> much over 400hp (until I throw one through the block
> and rebuild the
> motor with non el-cheapo parts).  The GT32 has a
> recommended hp range of
> 200-420 for 2.0->2.7L motors, the GT35 is spec'd for
> 260->510hp for
> 2.5->3.2L.  (I'm referencing numbers from Garrett's
> toy book:
>
http://www.turbobygarrett.com/turbobygarrett/images/garrett_inside/Garre
tt_Cat%207%2017%2013.pdf
> )
>
> I assume you are sticking with the stock Audi
> external wastegate?  I'm
> not sure what kind of housing options are available
> on the GT series..
> the catalog picture for the GT35 shows a T4 exhaust
> housing.  Do you
> know if it is available with a T3 flange?  And if
> you don't mind me
> asking, what was the damage to Mr. Mastercard for
> that thing?
>
>
> Thanks!
>
>
> --
> -Marc
> 87' 4ktq
> 88' 90q
> www.mswanson.com/audi
>
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list


=====
-------------------------------------
The following statement is false.
The preceding statement is true.
-------------------------------------



	
__________________________________
Do you Yahoo!?
Yahoo! Movies - Buy advance tickets for 'Shrek 2'
http://movies.yahoo.com/showtimes/movie?mid=1808405861
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list

=======
Notice: This e-mail message, together with any attachments, contains
information of Symyx Technologies, Inc. that may be confidential,
proprietary, copyrighted, privileged and/or protected work product,
and is meant solely for the intended recipient. If you are not the
intended recipient, and have received this message in error, please
contact the sender immediately, permanently delete the original and
any copies of this email and any attachments thereto.