[s-cars] Headlight Washer Wiring

[Keith Maddock]

Calvin,

This is a stretch, but easy enough to try so it might be worth a shot.

I had a problem with my headlight swtich where my high-beams were not
coming on at all.  At the suggestion of Shawn Olsen, I shot a spray of
WD40 in there, and then it magically worked.

It could be that the contact for the switch that enables the headlight
washer is sticking inside the switch ??

Cheers,
Keith


On Sat, 16 Oct 2004 15:48:02 -0600, calvinlc at earthlink.net
<calvinlc at earthlink.net> wrote:
> Hey guys,
> 
> I have finally gotten around to trying to track down my headlght washer
> problem and I have run into a dead end.
> 
> The pump itself works fine, verified with +12V.
> The wiring is not receiving 12V when I pull the stalk, yes the headlights
> are on :)  I am wondering where the white wire with the red stripe
> (positive) wire goes from the pump.  Is it fed by a fuse or relay?  The
> ground wire seems to be intact (0 ohms resistance to chassis) I don't have a
> Bentley so I am a bit lost at this point.  Somehow the headlights and the
> stalk have to play into it.  I do see a flicker on the meter when I pull the
> stalk but then it just goes right back to a few millivolts.  Thanks!
> 
> --Calvin
> 
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>