[s-cars] Switched 12 Volt source

[Kevin Day]

On Thu, Jul 28, 2005 at 10:46:08AM -0400, Steven Verona wrote:
> I would like to hard wire my Valentine 1 into my 95 S6 Avant and was  
> wondering where is the best source for a switched 12 volt supply?  I  
> am planing on mounting the remote display in front of the instrument  
> cluster, so a location as close to that is preferable.

I wired mine right here:
http://www.boost-instruments.com/wiring/pwrdist.jpg

Circuit #15 under the steering column.  This is not fused, so you need
to use an inline fuse.  I don't recall if the V1 remote power unit comes
with a fuse or not.  You can see two grounding studs in the lower left of
that picture also.

-Kevin