[s-cars] Re:Differences between RS2 manifold and stock? (update)

[Sean Douglas]

Harold:

Bonus! 

If you pull the ECU out and open it up, the 2 chips will look different.
Take a picture of the open board and post it here and someone here will
be able to identify the chipset.

Regards,

Sean Douglas


> -----Original Message-----
> From: s-car-list-bounces at audifans.com 
> [mailto:s-car-list-bounces at audifans.com] On Behalf Of Harold McComas
> Sent: Tuesday, March 01, 2005 9:45 AM
> To: s-car-list at audifans.com
> Subject: [s-cars] Re:Differences between RS2 manifold and 
> stock? (update)
> 
> 
> So I finally stuck my head under the hood and checked, I 
> definately have an 
> RS2 manifold. Found the another pic showing the differences 
> between the two 
> http://www.hoppenmotorsport.com/mvc-601f.jpg  Only found out 
> a year after 
> ownership. The guy I bought it from said it did not have any 
> mods that he 
> knew of. So over the course of a year I have noticed I have 
> Koni shocks 
> (stock springs), upgraded dash bulbs and now the RS2 
> manifold.(Good thing I 
> did not jump in on the last group buy for that) So how can 
> you tell if your 
> car is chipped or not? I will pull the ECU when it gets 
> warmer in the spring 
> and check.
> 
> You will have to forgive me for not knowing, but my '85 GTI 
> only has 140 hp 
> at most. The winter car I had before the S6 was a '87 VW 
> Quantum syncro 
> wagon with about 112 hp. My S6 is the only ur-S4/S6 I have driven.
> 
> Harold
> Manchester, NH 
> 
> 
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com 
> http://www.audifans.com/mailman/listinfo/s-> car-list
>