[s-cars] Its alive!!!
djdawson2 at aol.com
djdawson2 at aol.com
Sat Feb 25 02:45:48 EST 2006
A man that writes a car novel like this, is clearly READY to have his car back!!!
Dave
-----Original Message-----
From: CaptMagu at aol.com
To: s-car-list at audifans.com
Sent: Fri, 24 Feb 2006 21:38:59 EST
Subject: [s-cars] Its alive!!!
s-heads
http://pictureposter.audiworld.com/15038/img_2304.jpg
We had the car actually running today. We're still working on oil temperature
and speed sensing and a few odds and ends but everything else seems very nice
indeed.
I've had a few requests for my modification list, so here yo go:
ENGINE MODIFICATIONS
Head ported, polished, and flowed with race valve grind, port matched 034EFI
intake manifold that's ported & polished inside and out with Big Bore Throttle
Body and AAN mounts, RS2 exhaust cam, Bilstein lifters, heavy duty valve
springs, titanium retainers, steel head gasket, ARP head studs and retainers,
550cc @ 3.0 bar blue printed fuel injectors, 034 EFI fuel rail, Aeromotive
adjustable fuel pressure regulator, Bosch Motorsport 044 fuel pump, custom fuel
reservoir, -8 fuel lines, Autometer fuel pressure gauge, Apikol prototype
Stainless
Steel tubular exhaust manifold, TurboSmart Pro-Gate 48mm waste gate, 3?" SS
downpipe with custom SS exhaust, custom Garrett GT 35R .63 A/R hotside
turbo(Happersized) machined and assembled by TEC, 4" turbo intake with mushroom
air
filter, custom 24"x10.5"x4"(Happersized) FMIC with Garrett intercooler core and
Apikol cast end tanks, custom 2 3/4" charge air plumbing from turbo to
throttle body, hard mounted HKS Type II Racing bypass valve, custom aluminum
radiator
with custom shroud and dual SPAL highflow electric fans, Wiseco forged 83mm
coated stroker pistons, Pauter forged rods with ARP rod bolts, 92.8mm short
stroker crank(2.51 litre displacement), AEM stand alone engine management
system,
MSD Ignition Blaster, Earl's 27 row(Happersized) oil cooler mounted at the
stock I/C location, custom vacuum manifold, polished valve cover, polished
assorted aluminum engine bits(just about all of them).
OTHER MODIFICATIONS
Eibach Prokit springs at the front and custom coil-overs with 400 lb 8"
linear Eibach springs at the rear, corner weighted, custom valved Bilstein Sport
shocks, 2nd gen 2Bennett solid spherical bearing camber plates with caster
adjustment, 28mm Avant front sway bar, Pederhousen custom rear sway bar adapter
kit with 28 mm(Happersized +) 3 way adjustable Big Red custom HRSB, Porsche
993tt Big Red front calipers with Porsche 993tt 323x32mm 2-piece drilled rotors
with ASW hats, ASW brackets and Porterfield R4S pads(Pagid orange pads for the
track), Porsche 993tt Big Red rear calipers with custom 314x30mm 2-piece
drilled rotors, custom hats and brackets with Porsche Textar pads, stainless
steel
brake lines with Motul 600 fluid, parking brake activated WRC type master
cylinder with adjustable bias control for the emergency brake at the rear,
European CRB 6-speed transmission with hardened spline and hardened & wide first
gear, Apikol short shift kit and shortened shaft, Amoroso lead filled shift
shaft,
ASW Aluminum Flywheel(17 lbs lighter than stock dual mass), custom
Southbend race/street clutch, polished 17"x 8" BBS RC rims with 225/45-17
Nokiian
WRs for winter, 17"x 8.5" SSR Comp rims with 255/40-17 Kumho Victoracers for the
track, Euro headlights with relayed 100w H1 highs/4300K HID lows and clear
side markers, full 3 section Euro taillights, RS4 front and rear badges, Kamei
front grill with RS2 rings, custom lower front bumper cover & air intake with
custom grills to clear the FMIC, Sparco pedals, custom dead pedal, European
illuminated 6 speed shift knob, Audi Sport 3 spoke steering wheel, Sparco 3"
harness for the track.
ELECTRONICS
Alpine CDA 7998 MP3/CD Head Unit, Alpine CHA S634 6 Disc MP3/CD Player,
Alpine TUAT020XM Digital Sat Receiver, MB Quart QSD 210 4" components for the
front doors and QM218.61Q 6.5" Components for the rear deck, JL 300/4 Amp with
a Lightning Audio Digital Capacitor, AEM Standalone Engine Management System
featuring flat foot shifting, launch and boost control with computer terminal
and unlimited data logging and tuning, MSD Ignition Blaster to rplace the POSs,
Davtron I/C temperature gauge with In/Out/Differential readings mounted at
the center console, hard wired Valentine One with remote display, Techedge wide
band air/fuel ratio meter with digital readout, dual gauge pod at A-pillar
with Autometer Phantom 30lb boost/vacuum and EGT gauges.
ACKNOWLEDGEMENTS
The late Jim Latour of TEC built the turbo. While Dave Jones of 3R Racing was
responsible for most of the modification and fabrication work, I'd also like
to thank Jeremy, Darcy, and Sean for their expertise and help. Brendan Rudak
of Apikol engineered the impossible emergency brake system for the rear Big
Reds. Mike Pederson and Dave Dawson provided invaluable assistance and
encouragement.
Hap, wit moh dakine stuff than I know what to do with not in Evahboost,
Maguire
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list
More information about the S-CAR-List
mailing list