[s-cars] tips for O2 sensor removal

[CLAG500 at aol.com]

I had good results removing mine with a 22mm box-end wrench. Just unplug  the 
O2 sensor and put the wire through the box end. Now the trick is to reach  
through the the rubber flap where the tie rod goes through above the passenger  
side tire and grab the wrench. You may need to jack the car up slightly  
especially if you are lowered. This allows lots of leverage and the box end  wrench 
will provide a fairly good grip.
 
Chad 
 
In a message dated 11/14/2006 6:20:35 P.M. Eastern Standard Time,  
s-car-list-request at audifans.com writes:

Message:  3
Date: Tue, 14 Nov 2006 13:56:58 -0500
From: "Wylie Bean"  <theringmeister at triad.rr.com>
Subject: [s-cars] tips for O2 sensor  removal
To: <s-car-list at audifans.com>
Message-ID:  <000d01c7081e$a9f62370$6701a8c0 at D5150>
Content-Type: text/plain;  format=flowed; charset="iso-8859-1";
reply-type=original

It's obviously not a stretch to get to, but mine  looks like it's been there 
a while, and didn't budge using the tool I used  to change the one on my cq. 
Anybody have any useful advice for getting it  out.....lubes, tools, etc?

Thanks