[s-cars] Couple rookie urS4 questions

[Taka Mizutani]

I'm assuming that he was referring to having it built with the same mounting
points as stock.

You should ask Scott directly for more specifics- I do not have enough
experience with suspensions
to tell you whether there should be a different mounting point or not.

AFAIK, there are no mounts for a rear swaybar on the post '92 US-spec cars.

Taka


On 10/6/06, Mark Rivera <mrivera at webcats.net> wrote:
>
> That's good to have a datapoint on an ideal diameter, but equally
> important
> is the lever arm length of the bar itself, as well as where to mount it on
> each control arm.  Being a total noob at urS4's, there could already be
> mounting points for a swaybar on the rear control arms and chassi, but I
> didn't see any when I looked for them the other day.  Did Audi leave them
> on
> after '92?  Again, I've only been under the car once.
>
> Mark
>   -----Original Message-----
>   From: Taka Mizutani [mailto:t44tqtro at gmail.com]
>   Sent: Friday, October 06, 2006 12:58 PM
>   To: Sean Douglas
>   Cc: Mark Rivera; S-Car-List
>   Subject: Re: [s-cars] Couple rookie urS4 questions
>
>
>   Scott Justusson a while back suggested to me that if you could have one
> made, about 32mm would be right. The problem is getting someone who will
> fab
> a sway bar that is structural to the suspension- bigtime liability issues
> there.
>
>   Taka
>
>
>
>   On 10/6/06, Sean Douglas <quattro20v at telus.net> wrote:
>     Quoting Taka Mizutani <t44tqtro at gmail.com>:
>
>     > 4. Larger rear sway bar- the HSRB will work there, pretty any
> solution
> will
>     > require custom reinforced mounting brackets and a custom bar- there
> is
> next
>     > to nothing for a C4 car in terms of aftermarket bars.
>
>     Rumour has it that a "tuner" is considering making a larger rear bar
> for
> the
>     C4 if there is enough interest.
>
>     >
>     > 5. Larger front sway bar- everyone keeps omitting this one, but a
> big
> front
>     > bar will help reduce body roll, will make a huge difference,
> contrary
> to
>     > what people think- ask an experienced stock-class autocrosser about
> this
>     > one.
>
>     Are you suggesting the Avant front sway bar which is 28 mm vs 26 mm
> for
> the
>     sedan? Or something bigger?
>
>     Sean D.
>
>
>
>
>
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>