[s-cars] Windshield Wiper Question

[Jerry Scott]

This problem could be that the steel insert in the blade is installed 
with the curvature in the wrong direction.  This is assuming that these 
blades have the same removable insert as the OE blades.  It should be 
installed so that the curvature is opposite the windshield curvature.  
This will force the midpoint of the blade against the windshield.
Jerry

David Cahill wrote:

>S-Heads:
>
>When I purchased my s-car, I noticed that the wiper blades were not OEM, but
>rather an aftermarket Bosch approximation of OEM.
>
>Now it occurs to me that the curvature of the driver's side wiper blade does
>not perfectly match the curvature of the windshield. The net result is that
>the wiper leaves a patch of the windshield unswept - and I can't see through
>that part of the windshield too well.
>
>So ... Which wiper blades work best on our cars? What should I replace these
>with?
>
>Thanks,
>Dave
>(squinting at the windshield)
>_______________________________________________
>S-CAR-List mailing list
>S-CAR-List at audifans.com
>http://www.audifans.com/mailman/listinfo/s-car-list
>
>
>
>  
>