[s-cars] Cracked Big Brake Brackets - ECS Stage 2
manuelsanchez at starpower.net
manuelsanchez at starpower.net
Mon Oct 23 20:24:35 EDT 2006
Taka,
Igor also mentioned that he thought the RS2 calipers ran the same rotor as the ECS Stage 2 kit.
I can confirm that I am running the Euro A8 rotor with the ECS Stage 2 kit.
Hmmmm.
-manny
---- Original message ----
>Date: Mon, 23 Oct 2006 20:08:08 -0400
>From: "Taka Mizutani" <t44tqtro at gmail.com>
>Subject: Re: [s-cars] Cracked Big Brake Brackets - ECS Stage 2
>To: "manuelsanchez at starpower.net" <manuelsanchez at starpower.net>
>Cc: s-car-list at audifans.com
>
> Euro-spec A8 323x30 rotors. Not 2.7T rotors, I don't
> know what their dimensions are.
>
> The other option would be the two-piece 993tt rotor
> ring/ custom hat combo that lots of
> listers are running. As for hat dimensions, I don't
> know. I would see if someone else chimes
> in about that question.
>
> Taka
>
> On 10/23/06, manuelsanchez at starpower.net <
> manuelsanchez at starpower.net> wrote:
>
> Taka,
>
> Thanks for the info. These brackets have the
> following number on them
>
> ECS 1006
>
> I bought them about 3 years ago.
>
> Would you know what rotors are run with the RS2
> brackets (2.7TT?) and their respective size?
>
> Regards,
>
> -Manny
>
> ---- Original message ----
> >Date: Mon, 23 Oct 2006 10:47:20 -0400
> >From: "Taka Mizutani" <t44tqtro at gmail.com>
> >Subject: Re: [s-cars] Cracked Big Brake Brackets
> - ECS Stage 2
> >To: "manuelsanchez at starpower.net"
> <manuelsanchez at starpower.net>
> >Cc: s-car-list at audifans.com
> >
> > Manny-
> > If you look up this issue on Audiworld, some
> people
> > have mentioned improper
> > threading of the brackets as the cause.
> >
> > Hopefully, it was a run of brackets that is
> long
> > past, but unless someone logs what brackets
> are
> > defective (are there serial numbers on them?),
> you
> > would not know.
> >
> > The other solution, if you can verify that the
> hat
> > dimensions are compatible, is to source a set
> of RS2
> > brackets from Europe and use them. RS2
> brackets are
> > steel and OEM, therefore should not be an
> issue for
> > cracking.
> >
> > Taka
> >
> > On 10/23/06, manuelsanchez at starpower.net <
> > manuelsanchez at starpower.net> wrote:
> >
> > S-heads,
> >
> > I was having my tech inspection for upcoming
> VIR
> > school and found that both of my ECS Stage 2
> > caliper mounting brackets are cracked. Based
> on
> > some recent internet posts on the subject, I
> made
> > sure the tech checked carefully.
> >
> > I spoke with Gary at ECS, he was very nice
> and did
> > some checking with the returns department.
> He told
> > me he thougght this was an isolated
> incident. I
> > mentioned that I was clued into this
> potential
> > problem from chatter on the net, but he said
> he
> > had never run across the issue and he
> handles 50%
> > of the calls.
> >
> > I would be interested to know how many
> others have
> > had this problem and what you did about it
> > (contacted ECS?).
> >
> > I asked if the design had changed at all,
> and he
> > said no. I suppose it could be an isolated
> > manufacturing defect, but I wonder if it is
> a
> > design issue. Obviiously I would prefer that
> this
> > not happen again, and a design revision
> would
> > probably make me sleep better.
> >
> > So check you caliper mounting brackets.
> >
> > Again, Gary was very nice and helpful, and
> ECS
> > will warranty the brackets. I need to buy
> new
> > brackets, returned the cracked ones, and
> then they
> > will refund the cost of the replacement
> brackets.
> >
> > I'm wondering though what my other options
> would
> > be for a 993TT Big Red brake kit. Any
> thoughts?
> >
> > -manny
> > UrS6 Avant ' cracked ' brackets
> >
> _______________________________________________
> > S-CAR-List mailing list
> > S-CAR-List at audifans.com
> >
> http://www.audifans.com/mailman/listinfo/s-car-list
More information about the S-CAR-List
mailing list