[s-cars] 928 BBK pad install
Stott Hare
share at bluetarp.com
Thu Jul 31 06:02:19 PDT 2008
Actually, IIRC my 928GTS Big Blacks didn't have the pin. There was just
one big honkin' (technical term) butterfly spring holding the pads in.
Squeeze that spring together and remove the lower end(?) and then the
spring will flip up. Spread the pads, remove, and replace.
HTH,
-Stott
-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Theodore Chen
Sent: Thursday, July 31, 2008 3:50 AM
To: ron kirkham; s-car-list
Subject: Re: [s-cars] 928 BBK pad install
it's the easiest pad replacement you'll ever do.
there's a pin or bolt that runs across the caliper in the middle.
remove it. once it's out, pull the anti-rattle clip out. after that,
lever against the pads to push them apart and retract the pistons.
after that, the pads slide right out.
put some antiseize on the edges of the new pads, slide them in, install
anti-rattle clip, install pin/bolt.
this link might be helpful:
http://www.heumann.com/bigred/index.html
----- Original Message ----
From: ron kirkham <rkaudifool at gmail.com>
To: s-car-list <s-car-list at audifans.com>
Sent: Wednesday, July 30, 2008 9:11:41 PM
Subject: [s-cars] 928 BBK pad install
Can anyone give me a link or description on how to replace the brake
pads on
the Porsche 928 GTS "Big Blacks"?
Any help appreciated.
Ron
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list
More information about the S-CAR-List
mailing list