[s-cars] Headliner question

[Douglas Landaeta]

This stuff should do the job:
http://www.3mestore.com/60455030068.html
and it also seems to be the right product for the  bonnet pad in the engine
compartment - which my 500E needs.
I think Bentley notes a two part contact cement - maybe technology has
improved with these products. Whatever the case, the window glass is not
coming out.
Doug

On Mon, May 5, 2008 at 12:12 PM, Douglas Landaeta <dlandaeta at gmail.com>
wrote:

> ...maybe I should read the entire thread first... I don't trust most shops
> to do a good job on glass removal. I had a recommended shop replace the
> windshield and I asked for replacement of the front corner cowl rubber
> triangle pieces to make a like-new finish and I got the old ones cut up and
> re glued in place. - no water leaks and my wind noise problem is gone, but
> it could have been done better with the patience for the right dealer parts.
> If the headliner is not a DIY job, it'll sag for a while longer.
>
> Doug
>
>
> > >
> > >
> > >
> > >
> > >
> > >  ____________________________________________________________________________________
> > > Be a better friend, newshound, and
> > > know-it-all with Yahoo! Mobile.  Try it now.
> > > http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> > > _______________________________________________
> > > S-CAR-List mailing list
> > > S-CAR-List at audifans.com
> > > http://www.audifans.com/mailman/listinfo/s-car-list
> > >
> >
> >
>