[s-cars] So how do I remove rusted rear license plate bolts?

hoog23 at aol.com hoog23 at aol.com
Sat May 24 11:54:48 PDT 2008


Thanks Steve.?? Will give it a try.? Dave


-----Original Message-----
From: Young, Steve <sryoung at trane.com>
To: hoog23 at aol.com; s-car-list at audifans.com
Sent: Sat, 24 May 2008 11:42 am
Subject: RE: [s-cars] So how do I remove rusted rear license plate bolts?




Dave...

This is common.  Try not to work them too much so they spin.  I have
ground off the heads of the license plate mounting screws with a
grinder.  Once the plate is off, you can remove the two bolts that hold
the license plate surround to the trunk lid.  This is also held on with
the black gooey sealer that is used on the center taillights, so it
takes some pulling to get it off.  Once off, you can remove the rusted
captive nuts from the back of the plate surround.

You can get replacement captive nuts from the dealer, but you'll be in
the same spot in a couple years.  And if the square holes are rounded
out, the new nuts won't hold anyway.  A more permanent solution I have
found is to get regular license plate bolt sets from any auto parts
store.  The ones with the plastic snap in "nuts".  They snap right into
the square holes on the surround.  If the holes are rounded out, square
them off with a file.  If they aren't too bad, you should still be able
to make the "nut" snap in.  If they are rounded out too big, use 2-part
epoxy and glue the plastic "nut" onto the surround.

Good luck.


Regards,

Steven Young
Local Operations Manager - Albany
____________________________________TRANE
301 Old Niskayuna Rd., Latham, NY  12110
Tel: 518.724.1453
Fax: 518.785.4359

www.trane.com

The information in this message is the property of TRANE. This message
is intended only for the use of the addressee named above and may
contain legally privileged and/or confidential information.  If you are
not the intended recipient of this message, you are hereby notified that
any use, dissemination, distribution or copying of this message is
strictly prohibited.  If you receive this message in error, please
notify us immediately by telephone or return e-mail and delete the
message, all copies thereof and any attachments. We thank you for your
cooperation.


-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of hoog23 at aol.com
Sent: Saturday, May 24, 2008 10:31 AM
To: s-car-list at audifans.com
Subject: [s-cars] So how do I remove rusted rear license plate bolts?

Been on about 4 yrs now...? When I try to remove them they are either
frozen or spin.? Do I just remove the trim piece on the underside of the
trunk and get at them with vice grips?

I got a nice audi sport?frame waiting to be installed.

TIA!
Dave
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list



More information about the S-CAR-List mailing list