[s-cars] Rear License Plate Bracket

[Young, Steve]

Tim...

This was just discussed a couple days ago.  The plate surround is
attached with two bolts into the truck lid located under the license
plate, and the black gooey stuff.  Once you remove the surround, the
captive nuts can be removed from the back.

Do a search for recent posts for more info on what to do with bad
captive nuts.  Should have been within the last week or so.  Good luck. 


Regards,

Steven Young
Local Operations Manager - Albany
____________________________________TRANE
301 Old Niskayuna Rd., Latham, NY  12110
Tel: 518.724.1453
Fax: 518.785.4359

www.trane.com

The information in this message is the property of TRANE. This message
is intended only for the use of the addressee named above and may
contain legally privileged and/or confidential information.  If you are
not the intended recipient of this message, you are hereby notified that
any use, dissemination, distribution or copying of this message is
strictly prohibited.  If you receive this message in error, please
notify us immediately by telephone or return e-mail and delete the
message, all copies thereof and any attachments. We thank you for your
cooperation.


-----Original Message-----
From: s-car-list-bounces at audifans.com
[mailto:s-car-list-bounces at audifans.com] On Behalf Of Tim Larson
Sent: Thursday, May 29, 2008 9:05 AM
To: s-car-list at audifans.com
Subject: [s-cars] Rear License Plate Bracket

All four of the metal clips that are set in the plastic have been
stripped out and I now have no way to fasten the rear license plate.
The plastic frame /bracket/what have you is not removable from the trunk
lid (held on by a piece of rubber attached to trunk).  Anyone have any
solutions other than gluing the plate on or drilling holes through the
trunk lid?
_______________________________________________
S-CAR-List mailing list
S-CAR-List at audifans.com
http://www.audifans.com/mailman/listinfo/s-car-list